Brake spring pliers with collar, suitable for both popped and glued linings of drum brakes.
With movable claw plate for good grip.

Length pliers 330mm
Jaw opening 90mm

Brake spring pliers specially designed for the installation and removal of drum shoe return springs. Thin narrow points with "Straight-in-Line" pull on spring. Includes special socket for application on all hydraulic brakes.

Brake spring pliers suitable for drum brakes of cars and light trucks. One end hooks onto the spring, the other grips the brake lining attached to the brake shoe.
- Length: 215 mm

This Brake Spring Washer Pliers are suitable for universal use on almost all drum brake systems. Thanks to the special neck angle of up to 50°, brake spring washers can be quickly and easily removed or installed, even in hard-to-reach areas. With a compact length of 180.5 mm, the pliers offer optimal control and ease of use. An essential tool for any workshop or DIY enthusiast!

Robust metal valve puller suitable for mounting all tubeless valves in the rim.

Handy tool for easily mounting brake springs of drum brakes and.
With this mounting hook, you get a strong grip and can easily apply force to the stiff spring to tension it into the correct position.
- Material: molybdenum alloy steel.

Designed for quick and easy replacement of brake disc pads.

Perfectly suited for quick and effective honing of brake cylinders or smaller engines such as those of motorcycles, mopeds, lawnmowers, etc.

With a flexible drive shaft for use in electric or pneumatic drills.

Adjustable working pressure through self-expanding and adjustable honing arms.

The specially shaped guide arms press the honing stones precisely and evenly against the cylinder wall.

Only hone when the stones are fully inside the cylinder; during honing, the stones should make light contact with the wall.

Make light vertical movements while honing to create a crosshatch pattern for better piston lubrication.
- Suitable for cylinder diameters from 22 – 63 mm
- 3 stones: 28.5 x 5 mm

Set of 3 honing stones (28.5 x 5mm) for the 9G0902

#220 grit

Brake drum caliper suitable for measuring the thickness of the brake drum. Measures the degree of wear to ensure it remains within the manufacturer's specified limits. Capacity: 160 – 400 mm, with metric and inch scale.

Brake disc puller for removing stuck brake discs. The puller pins are easily adjustable, allowing for quick and easy mounting of the tool. Using the brake disc puller avoids hammering effects on wheel bearings, electronic sensors, suspension, and ball joints.

Suitable for discs with a diameter of 170 mm to 400 mm.

For disassembly and assembly of dish and retaining plate, with which the brake shoe is held on the pins. Universally suitable for all vehicle brands.