Universal bearing and pulley puller set with self-clamping and self-centering arms. Thanks to overlapping sizes, it can be used for almost any task you may encounter. The puller arms are interchangeable to suit a wide variety of applications. Suitable for both internal and external use.

This bearing puller can be secured to the workpiece using hex screws, preventing the arms from slipping off. Ideal for small bearings or pulleys in tight spaces. Features self-centering quick clamping.

Clamping range: 19–35mm

Designed plus built to provide we positive pulling energy to eliminate bearings groove pulleys about alternator plus energy steering pumps. The connected jaws fit over the flange plus are secured into position by adjusting screws.

Removing and refitting interior panels during dent removal can often be time-consuming. This tool simplifies the process. Simply drill a hole using the self-tapping screw attached to the tool. A few powerful strikes with a slide hammer are then enough to pull out the dent.

10-piece puller set is ideal for working on fenders, panels, door edges, etc. Suitable for use on both sides without the need to turn it around. Includes a solid 16 mm steel puller weighing 5.4 kg (12 lbs).

Extra large ball joint puller with a maximum clamping range of 80 mm for light delivery and transport vehicles from Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo. Loadable up to 45 Nm, the pressure on the ball is then 3 tons, ideal for seriously rusted balls.

Opening jaw: 22 mm
With 2 working positions due to the adjustable hinge, with a maximum clamping range of 50 mm and 80 mm

Puller for removing pulleys or gears. Equipped with thick jaws for gripping the component.
- Hook thickness: 1.5mm
- Depth: 100mm
- Width: 40–90mm

Suitable for removing bearings, inner races, and other tightly fitted components.

By tightening the separator plates, the sharp, wedge-shaped jaws grip behind the component to be removed.
- Separator capacity: 75–105mm.
- Includes extension rods and spindles.

This hydraulic puller is ideal for disassembling bearings, bushings, wheels, clutches, and pulleys.
- 12 tons
- Reach: 300/245mm
- Jaw opening: 235/90mm
- Stroke: 82mm

#N/A

Especially suitable for removing bearings, inner rings, and other tightly fitted components.

By tightening the plates together, the sharp, wedge-shaped jaws grip behind the component to be removed.
- Separator capacity: 75–105mm
- Includes: extension rods and spindles
- Center bolt

10-piece ball bearing puller set, extra heavy-duty version for removing larger bearings.

With interchangeable heads, included extensions, and adjustable reach, this puller is highly versatile. Made from carbon steel, it offers a clamping range of 20–95 mm.

The set includes interchangeable heads with diameters of 5.5, 6, and 8 mm, and 2 screw-on extensions of 30 and 95 mm.

Spindle size: M10 x 1.5 mm, length: 130 mm.

Suitable for deep groove ball bearings (FAG, SKF, INA, NTN, etc.), ISO bearing types 6004–6010, 6200–6206, 6300–6302.