Search in assortment

For testing the optimal fluid density of the battery, antifreeze, windscreen washer fluid and Adblue. Including case with fluid pipette and zero set screwdriver.

Measuring range:
- Coolant (antifreeze) -50 degrees to 0 degrees Celsius for propylene, ethylene and G11, G12, G13 coolant from VAG (Audi, Porsche, Seat, Skoda, Volkswagen)
- Adblue 30 to 40% (also Urea and DEF)
- Battery acid charge status 1,100 to 1,400 Kg/l
- Windscreen wiper fluid -40 degrees to 0 degrees SRFI

Works like binoculars: place a drop of fluid with the pipette on the prism. Close the lid. Look through the adjustable binocular opening. Read the value on the clear scale. Always rinse the prism with clean water, because battery acid is very aggressive. This extends the life of this tester. The tester can be easily calibrated by the user himself.

Suitable for the nut on the cooling fan visco coupling of BMW, Ford and Opel, among others.
Slim key, comfort handle covered with plastic.
- Size: 32 mm

Suitable for:

BMW: 316 / 520i / 525i / 530i / 535i / 730i / 735i
Ford Capri / Sierra / Granada 2.0 & 2.8
Ford Transit 2.0 1986-90 ( with visco )
LCX 2.0 / LCT 2.0 / 2.5 diesel 1980-90
LCX 2.5D & LCY 2.5D

A quick and inexpensive way to determine the protection level of your coolant and/or antifreeze. Clearly indicates how well the fluid is protected against freezing. Also prevents engine overheating due to insufficient temperature resistance of the coolant. Can be used in both warm and cold weather. Only remove the radiator cap when the engine has cooled down. Then run the engine until operating temperature is reached. Pump the fluid up to the fluid line. Tap out any air bubbles and hold the tester upright. Read the level of protection using the clear arrow indicator.
- Suitable for ethylene and glycol solutions
- Works with hot and cold fluids
- Provides a visual check for rust and sediment

Including high-side and low-side coupling
Straight design suitable for limited space
With 1/4'' male thread

Quick coupling set for all common R1234YF car air conditioning systems.

For detecting even the smallest leaks in refrigerant, cooling, engine oil (diesel and petrol), transmission oil, and power steering systems.

Lightweight UV leak detection lamp, allowing longer work with less fatigue. The lamp lens is protected against dirt and damage.

Includes contrast-enhancing safety glasses. These glasses enhance the light effect of the leaking additive, making the leak easier to see.

Safety glasses must always be worn when using the UV leak detection lamp!
- Lightweight 12 Volt UV leak detection lamp
- Contrast-enhancing safety glasses
- 50W

Professional vacuum coolant refill system specially designed for Tesla models.

Thanks to large internal passages, the cooling system can be refilled quickly and efficiently. The tool operates with air pressure (air compressor required) to create a vacuum in the cooling system, preventing air bubbles.

Equipped with only two control valves for easy and intuitive operation. Includes a hook for hanging under the hood and adapters suitable for all Tesla models.

These spring loaded stoppers are suitable for blocking disconnected steel brake fluid and fuel lines to prevent fluid from leaking out of the line.

Prevents leakage of e.g. brake fluid or fuel and contamination of the work floor
Perfect for working on brake lines and fuel lines
Spring loaded for instant on/off
Sizes: Banjo, 3/8”, 5/16”, 1/2”
Suitable for all automotive fluids

Suitable for closing flexible brake lines, radiator hoses, vacuum hoses, fuel lines, etc.
With these hose clamps, unwanted leaks and pinched hoses are a thing of the past.
These clamps can be tightened quickly by hand and do not damage the line.

Universally applicable for disconnecting both air conditioning and fuel lines.

By inserting the appropriate adapter between the quick-connect fittings, the retaining spring is easily released.

Sizes:
- 6.4 mm (1/4")
- 7.9 mm (5/16")
- 9.5 mm (3/8")
- 12.7 mm (1/2")
- 15.9 mm (5/8")
- 19 mm (3/4")
- 22.2 mm (7/8")

Compatible with vehicles from: Chrysler, Ford, GM, Daihatsu, Honda, Mercedes, Mitsubishi, Nissan, Opel, Saab, Scania, Volvo, Volkswagen, etc.

With this set, it is possible to test both the cooling system and the radiator cap for leaks. Using the hand pump, you can easily pressurize the radiator and cooling system to detect leaks.

Suitable for, among others: Mercedes - GM - Jeep - Peugeot - Chrysler - Acura - Mitsubishi - Nissan - Mazda - Toyota - Infiniti - Geo - Suzuki - Isuzu - Ford - Honda.

0~35 PSI - 2.5 Bar

For removing/installing air conditioning valves without losing pressure.