Search in assortment

For disassembling and installing seals in the crankshaft of Audi, Fiat, Seat, Skoda, Volkswagen with 1.4 and 1.6 16V engines. Ensures correct alignment of the crankshaft sensor in the main seal housing. The crankshaft seal is also the seat of the crankshaft sensor and the sensor ring in these VAG engines. An incorrectly aligned sensor causes a poorly running engine and if the alignment is too bad, the engine will not even start. Reason enough to ensure that you do not have unnecessary repairs during installation. Therefore, use this crankshaft seal alignment tool, then you are always sure of your case. OEM number T10017.

Applications:
Seat Arosa 1.4, Ibiza 1.4, Cordoba 1.4, Leon 1.4/1.6, Toledo 1.4/1.6 and Inca 1.4 16V
Skoda Fabia 1.4, Fabia II 1.6, Octavia 1.4 and Roomster 1.4 16V
Volkswagen Lupo 1.4/1.6, Polo 1.4/1.6, Polo Classic 1.4, Golf/Bora 1.4/1.6, Beetle 1.4, Caddy 1.4 16V
Also suitable for Fiat engines with code BAG 1.6 direct injection (petrol)
Engine codes:
AER, AEX, AHW, AJV, AKK, AKQ, AKV, ALD, ALL, ANW, ANV, APE, APQ, AQQ, ARR, ATN, AUA, AUB, AUC, AUD, AUS, AVY, AXP, AZD, BAD, BAG, BBY, BBZ, BCA, BCB, BKY, BLP, BLF

For manually locking deep water pump pulleys and power steering on Audi and Volkswagen during timing belt work.

The tool fits precisely over the three alignment bolts of the pulley.

Can be used for many VAG engines with built-in air conditioning.

Also suitable for loosening stuck bolts on the water pump pulley.
- Length: 300 mm

Mounting tool for installing and removing the central valve for camshaft adjustment.

This set uses compensated pins.

Suitable for:
- Audi A3 with 4-cylinder gas direct injection, 1.8 liter, 2.0 liter, 4-valve, TFSI engine with chain.

Engine codes:
- AXX
- BPY, BWA, BYT, BZB,
- CABA, CABB, CABD, CADA, CAEA, CAED, CAWA, CAWB, CBFA, CCTA, CCTB, CCUA, CCZA, CCZB, CCZC, CCZD, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDZA, CESA, CETA, CFKA, CFPA, CGYA, CHHB, CHHC, CHJA, CJEB, CJEE, CJKA, CJSA, CJSB, CJXB, CJXC, CJXF, CJXG, CNCD, CNCE, CNSB, CNTC, CPMA, CPMB, CPSA, CULA, CULB, CULC, CWZA, CXCB, CXDA, CYGA, CYNB, CYPA
- DAJA, DAJB, DAJB, DEDA, DEDA

OEM number: T10352

Camshaft locking tools required for VAG 4.2 V8 petrol engines.

OEM T40046

Applications:

Audi B6 S4

Audi B7 S4

Audi A6

Audi A8

Volkswagen Phaeton

Engine codes:
- BAS, BAT, BBK, BHF

Camshaft locking tools required for VAG 3.2 FSI petrol engines.

OEM T40133

Applications:

Audi A5 and Q5 3.2L V6

Audi A6 2.8 / 3.2 FSI and 3.0 TFSI (from 2005)

Engine codes:

CCAA, CALA, CALB, CGWB, CHMA, CNYA, CHVA, CGXC, CREC, CTUB, CAKA, BDX

Special tool for engine work on Porsche Cayenne and Panamera 4.5 and 4.8 V8 models. For adjusting camshaft timing, replacing the cylinder head gasket, camshaft replacement, etc.

OEM: 9678/1

Applications:

Porsche Cayenne S

Porsche Cayenne GTS

Porsche Cayenne Turbo

Porsche Cayenne Turbo S

Porsche Panamera S

Porsche Panamera Turbo S

Engine codes:

V6 3.0L MCW.DA

V6 Turbo 3.6L MCU.RA

V8 4.8L M48.01

V8 4.8L M48.02

V8 4.8L M48.20

V8 4.8L M48.40

V8 4.8L M48.51

V8 4.8L M48.52

V8 4.8L M48.70

V8 4.8L MCF.TB

V8 4.8L MCW.BA

V8 4.8L MCW.DA

For locking both camshafts and the crankshaft on VAG 1.2-liter 3-cylinder 6V and 12V petrol engines.

Note: This set is not suitable for tightening the camshaft sprockets. For that purpose, we recommend the following tool: 911G1.

Contents:

Camshaft alignment tool 6V

Camshaft alignment tool 12V (2 pieces)

Crankshaft locking tool 6V & 12V

Applications:

Volkswagen Polo, Lupo and Fox 1.2-liter, 3-cylinder 6V and 12V (from 2002)

Seat Cordoba and Ibiza 1.2-liter, 3-cylinder 6V (2002–2009)

Skoda Fabia and Roomster 1.2-liter, 3-cylinder 6V and 12V (2002–2010)

Engine codes:

AWY, BBM, BMD, AZQ, BME, BXV, BZG, CHFA, CHFB, CEVA, CGPA, CGPB, CGPC, CJLB

OEM Numbers:

T10123 (2x), T10121, T10120

Suitable for the new VAG 1.2 and 1.4 belt-driven TSi engines, including the 1.4 TSi ACT.

Includes all essential tools for working on the camshaft and timing belt.

Applications:

Audi: A1 (2012–2015), A1 Sportback (2012–2015), A3 (2013–2015), A3 Sportback (2012–2015)

Seat: Mii Ecofuel & Ecomotive (2012–2014), Ibiza (2012–2015), Leon (2012–2015), Toledo (2012–2015)

Skoda: Citigo & Fabia Ecofuel & Greentech (2012–2014), Fabia (2010–2013), Octavia II (2010–2013), Octavia III (2010–2015)

Volkswagen: Up & Polo Ecofuel & Bluemotion (2011–2014)

Engine codes:

1.2 CJZA / CJZB

1.4 CGGA / CHPA / CMBA / CPVA / CRJA / CXSA

1.4 (TSi ACT)

#N/A

Special tool set for engine work and timing chain replacement on VAG 1.8 and 2.0 TSi/TFSi engines. Includes the necessary tools to set the engine to TDC, locking tools for both types of timing chain tensioners, and tools for the oil pump chain tensioner. Also includes essential tools for removing the camshaft control valve.

Applications:

Audi: A3 Cabriolet (2008–2016), A3/A3 Sportback (2007–2016), A3/A3 Sportback (2012–2016), A4 (2004–2015), A4 Cabriolet (2005–2009), A4 Quattro (2004–2008), A4 Quattro (2008–2014), A5 Coupe/Cabriolet (2007–2017), A5 Sportback (2009–2017), A6 (2005–2014), Q3 (2011–2016), Q5 (2008–2016), S3 (2006–2008), TT (2006–2017)

Seat: Alhambra (2010–2015), Altea (2006–2015), Leon (2006–2017), Toledo (2006–2009)

Skoda: Octavia II (2009–2013), Octavia III (2013–2017), Superb II (2008–2015), Yeti (2009–2013)

Volkswagen: Amarok (2010–2016), Beetle (2013–2016), Cabriolet (2012–2014), CC (2012–2015), Golf V (2007–2013), Golf VI Estate (2009–2014), Golf VII (2013–2015), Scirocco (2008–2014), Tiguan (2007–2015), Transporter T5 (2011–2015)

Engine codes:

1.8 TSi/TFSi: BXB, BYT, BZB, CABA, CABB, CABD, CDAA, CDAB, CDHA, CDHB, CGYA, CJEB, CJSA, CJSB, CJSC

2.0 TSi/TFSi: AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWA1, BWE, BWJ, BWT, BYK, BZC, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDLA, CDNB, CDNC, CDND, CESA, CETA, CFPA, CHJA, CJKA, CJKB, CJXA, CJXB, CJXC, CJXE, CJXE, CJXH, CPLA, CPSA, DEDD

For locking the crankshaft on VAG 2.5?D TDI V6 vehicles

Suitable for:

Audi: 80, 80 quattro, 100, 100 quattro, 200, A4, A4 Cabriolet, A4 quattro, A6, A6 Allroad, A6 quattro, A8, allroad, Coupé quattro, Q7, R8, RS4, RS6, S4, S4 Cabriolet, S5, S5 Cabriolet, S6, S8

VW: Bora, Golf Cabriolet, Passat, Phaeton, Sharan, Touareg

Engine codes:

Audi: ABC, AAH, AMX, APR, ATX, ACK, ALG, AQD, AYM, AKE, BCZ, BDG, BDH, BAU, BFC, AKN, AFB, BPP, BSG, BKN, BDV, AMM, APS, ALF, AGA, AJG, AML, APZ, ARJ, ASB, CAPA, AGB, AJK, ALW, ASM, APC, ARN, AGE, BVJ, BNG, AYM, BDH, BMZ, BMK, AZA, BES, ARE, BAT, AWN, ASG, ARS, ARU, AVN, AUW, AQF, ASE, BSB, BTH, AZC, BAS, BAR, BUN, BUG, BYH, BNS, ASJ, AZR, BUH, BRV, BCY, AGB, AZB, BHF, BBK, CAUA, BXA, ANK, AQJ, BSM, AQH, APU, DE, AWA, AFF, AHH, 1Z/AHU, AFN, AVG, BKE, AWX, BRB, AVB, AVF, ATJ, AJM, BVF, BRC, BRF, BNA, BRE, BLB, BPW, BVA, BVG, BUL, BPG, BPJ, BWE, BGB, AMB, BEX, AVJ, BFB, AJL, ANB, AWT, AEB, ALZ, ANA, AHL, ARM, ADP, APT, ARG, AVV, ADR, ALT, AFV, CCLA, CCWA, CTYA, CMPA

VW: BDH, BAU, AKN, AFB, BDN, AMX, BBG, AGE, AMX, APR, ATX, ACK, ALG, AQD, CARA, BMK, BAN, BRP, BTT, BAP, BRN, BAR, CASA, BUN, BKS, CASB, BHX, AXQ, BJN, ATU, AWG, AWF, AVG, AHU, AHH, AKN, BDH, BDG, AVF, AWX, AVB, AJM, ATJ, AEB, ANB, APU, ALZ, ADP, AHL, ARM, ANA, ADR, ARG, APT, AZM, AMX, SSG, ALG, AQD, ACK, AGE, AFN, Z1/AHU, CATA, CDYB, CAND

The kit includes:
- Crankshaft locking tool for Audi petrol engines: 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0; for diesel engines: 2.5, 2.7, 3.0 TDI, 3.0 TDI CR
- For VW: 4.0 W8, 4.2 FSI, 2.8, 4.2, 6.0; for diesel engines: 2.5, 3.0 TDI, 3.0 TDI PD, 3.0 TDI CR
- Camshaft locking tool for Audi 2.5 TDI and VW 2.5 TDI engines
- Front panel removal tool for Audi petrol engines: 1.6, 1.8, 2.0, 2.4, 2.6, 2.8, 3.0, 4.2, 2.8 V30, 2.0 FSI, 2.0 TFSI, 1.8, 2.7 Turbo; diesel engines: 2.0 TD, 1.9, 2.5 TDI, 1.9, 2.0 TDI PD
- For VW: 1.8 Turbo petrol engines, 1.6, 1.8, 2.0, 2.8; diesel engines: 1.9 TDI PD, 1.9, 2.5 TDI
- 21 mm damper pulley wrench
- Timing belt tension pin: 4.4 mm diameter

Special designed set of tools for allignment camshaft lock and adjusting.

Application:

AUDI 2.4, 3.2 FSI chain drive petrol engines in: AUDI A2, A3, A4 Quattro, A6, A6L Quattro, A8 (04-07).

Engine codes:

AUK

BDW

BDX

BKH

CAJA

CALA