The Digital Circuit Tester 6–48V is a reliable and user-friendly device for checking DC voltage systems. Thanks to the easy-to-read LCD display, you can instantly see the accurate voltage value, enabling quick and precise diagnostics.

This tester is compatible with most vehicles, including cars, motorcycles, commercial vehicles, trailers, boats, agricultural machinery, and mild hybrid vehicles.

It supports voltage measurements of 6V, 12V, 24V, 42V, and 48V DC, making it ideal for both professional and personal use.

For added flexibility, the tester features a retractable spring cable that extends up to 3 meters (12 ft)—perfect for working in and around the vehicle.

Key features:
- LCD display shows accurate voltage readings
- Suitable for DC systems: 6 / 12 / 24 / 42 / 48V
- Compatible with a wide range of vehicles and machinery
- Retractable spring cable up to 3 meters
- Compact, lightweight, and easy to use

Special adapter that ensures that the memory is not lost when a battery is disconnected.
Suitable for 12V batteries.
The 2 LED lights indicate whether the battery has enough power.
Suitable for all cars that have an OBD II connection.
Functions: LED Display, prevents the adapter from disconnecting, gives a warning when the battery is almost empty.

Instructions:

1: Remove the key
2: Connect the backup power to the car via the OBD II connector
3: Go to step 4 if the device shows a green light. If not, there is a bad contact or no signal.
4: Connect the main power (9V or 12V).
5: Make sure that 2 green lights are on, a red light means that there is not enough power.

With this battery tester you can check the condition of your car battery by means of a resistance test. In contrast to the classic method where the battery is discharged by the applied resistive load and you read the result on the meter, this tester sends a number of impulse voltages through the battery cells and measures the alternating current through these cells.
Works on all 12V lead, AGM and gel batteries, regardless of size. The device uses a test signal pattern to test and monitor the battery cells. The battery is never discharged. Maintenance-free, no internal batteries required. Tests batteries in or outside the vehicle. Accurate results in milliseconds. Analyses the status of the battery. Large, easy-to-read LCD display. Test results based on the standards JIS, EN, DIN, SAE and IEC. Super compact (fits in the palm of your hand)

Technical data:
System voltage: 12 V
Input voltage range: 9 V - 15 V
Test range: 100 - 1700 CCA, 100 - 1000 DIN, 100 - 1000 IEC, 100 - 1700 EN (max. 170A)
Test results: 'Good' - 'Replace'
Display: 2-line LCD display
Applications: Motorcycle, car, boat etc.
Working temperature: 0 to 50°C (32 to 122 F°)
Storage temperature: -20 to +70°C (-4 to +158 F°)
Cable length: 110 cm
Weight: 240 g

The TS 600 battery tester is a compact and user-friendly device for testing batteries, starter motors, and charging systems in motorcycles and cars. Accurately measures the state of charge, health, CCA, and internal resistance of 6V and 12V batteries (WET, EFB, AGM, GEL). Also checks starter motor performance and alternator efficiency to ensure reliable starting and charging.

Key features:
- Suitable for 6V and 12V vehicles
- Battery, starter motor, and alternator testing
- Measures CCA, internal resistance, and charge status
- Easy operation via digital display
- Multilingual software (10 languages)
- Includes cables with clamps (73 cm)

Technical data:
- Battery capacity: 5–220Ah
- CCA range: 10–2000
- Measuring standards: CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, JIS, GB
- Operating range: 5–16V DC

The TS 700 battery tester is a compact and user-friendly tester for batteries, starter motors, and charging systems of motorcycles, cars, and commercial vehicles. It accurately measures the state of charge, health, CCA, and internal resistance of 12V batteries (WET, EFB, AGM, AGM POWER, GEL, LiFePO4). Additionally, it checks the performance of the starter motor and the efficiency of the alternator, ensuring reliable starting and charging.

Key features:
- Suitable for 12V and 24V vehicles
- Battery, starter motor, and alternator tests
- Measures CCA, internal resistance, and state of charge
- Easy operation via digital display
- Multilingual software (6 languages)
- Includes cables with clamps (65 cm)

Technical data:
- Battery capacity: 3–360Ah
- CCA range: 30–3000
- Measurement standards: CCA, EN, SAE, IEC, JIS, Ah, DIN, MCA, BCI, CA
- Operating range: 7–30V DC
- Storable tests: 20

The TSP 800 battery tester is a practical and versatile device for testing batteries, starter motors, and charging systems of motorcycles, cars, and commercial vehicles. It accurately measures the state of charge, health, CCA, and internal resistance of 12V and 24V batteries (WET, EFB, GEL, AGM, AGM POWER, LiFePO4). It also checks the performance of the starter motor and the efficiency of the alternator, ensuring reliable starting and charging. Thanks to the integrated printer, test results can be printed immediately and customized with business and customer information.

Key features:
- Suitable for 12V and 24V vehicles
- Battery, starter motor, and alternator tests
- Measures CCA, internal resistance, and state of charge
- Easy operation via digital display
- Integrated printer with customizable results
- Multilingual software (11 languages)
- Last test result is stored

Technical data:
- Battery capacity: 5–220Ah
- CCA range: 10–2000
- Measurement standards: CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, JIS, GB
- Operating range: 8–28V DC
- Paper roll size: 57mm x 7m
- Temperature compensation

Test the actual capacity of the battery under voltage
Makes a battery condition test. Test the alternator
For 6 and 12 volt batteries
For lead/acid batteries up to 100Ah