Portable traditional battery charger 12/24 Volt for charging Pb wet batteries (lead batteries.)
Charging current regulation.
Overload protection.
Reverse polarity protection.
Clamp short circuit protection.
Input cable 2.2 m with "Schuko" plug.

Technical data:

Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 130W
Nominal battery voltage: 12/24 Volt
Average charging current: 6 Amp
Effective charging current: 9 Amp. max
Charging functions: 2
Battery capacity (Ah min/max): 15 / 140

Portable traditional battery charger 12/24 Volt for charging Pb wet batteries (lead batteries.)
Charging current regulation.
Overload protection.
Reverse polarity protection.
Short circuit protection on the terminals.
Input cable 2.2 m with "Schuko" plug.

Technical data:

Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 300W
Nominal battery voltage: 12/24 Volt
Average charging current: 12 Amp
Effective charging current: 20 Amp. max
Charging functions: 2
Battery capacity (Ah min/max): 10 / 250 Ah

Mobile battery charger with starting aid (Booster) 12/24 Volt for charging Pb wet batteries (lead batteries.)
Charging current regulation.
Overload protection.
Reverse polarity protection.
Short circuit protection on the terminals.
Input cable 2.0 m with "Schuko" plug.

Technical data:

Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 0.7 - 3.5 KW
Nominal battery voltage: 12 / 24 Volt
Average charging current: 14 Amp
Effective charging current: 20 Amp max
Charging functions: 2
Starting current Booster (Amp 0 Volt DC): 250
Starting current Booster (Amp 1 Volt / EL): 160
Battery capacity (Ah min / max): 25 / 350
Dimensions: 400 x 300 x 640 mm

Mobile battery charger with starting aid (Booster) 12/24 Volt for charging Pb wet batteries (lead batteries.)
Charging current regulation.
Overload protection.
Reverse polarity protection.
Short circuit protection on the terminals.
Input cable 2.0 m with "Schuko" plug.

Technical data:

Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 1.3 - 6 KW
Nominal battery voltage: 12 / 24 Volt
Average charging current: 26 Amp
Effective charging current: 40 Amp max
Charging functions: 4
Starting current Booster (Amp 0 Volt DC): 400
Starting current Booster (Amp 1 Volt / EL): 270
Battery capacity (Ah min / max): 35 / 500
Dimensions: 400 x 300 x 640 mm

Battery charger with starting aid (Booster) 12/24 Volt for charging Pb wet batteries (lead batteries.)
Charging current regulation.
Overload protection.
Reverse polarity protection.
Short circuit protection on the terminals.
Input cable 2.0 m with "Schuko" plug.

Technical data:

Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 1 - 3.5 KW
Nominal battery voltage: 12 / 24 Volt
Average charging current: 14 Amp
Effective charging current: 50 Amp max
Charging functions: 2
Starting current Booster (Amp 0 Volt DC): 450
Starting current Booster (Amp 1 Volt / EL): 330
Battery capacity (Ah min / max): 15 / 500
Dimensions: 340 x 300 x 160 mm

Mobile battery charger with starting aid (Booster) 12/24 Volt for charging Pb wet batteries (lead batteries), AGM and Start & Stop batteries. Charging current control
Built-in timer function
Overload protection
Reverse polarity protection
Short circuit protection on the terminals
Input cable 2.0 m with "Schuko" plug

Technical data:

Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 1.7 - 7.5 KW
Nominal battery voltage: 12 / 24 Volt
Average charging current: 50 Amp
Effective charging current: 75 Amp max
Charging functions: 4
Starting current Booster (Amp 0 Volt DC): 500
Starting current Booster (Amp 1 Volt / EL): 330
Battery capacity (Ah min / max): 35 / 600
Dimensions: 470 x 320 x 750 mm

Multifunctional portable jump starter equipped with a lithium battery (LiFePO4). Suitable for use as an emergency starter for motor vehicles with a 12/24V electrical system. Suitable for both petrol and diesel engines. Equipped with LED lamp with light function continuous/flashing and S.O.S.

Technical data:

Power supply: 100/240V
Starting voltage: 12V / 24V
Max. starting current: 12V = 3000A / 24V = 2000A
Max. energy after 3 sec.: 20000J
Battery capacity: 35000mAh
Starting capacity petrol engines (25°C): 8000cc
Starting capacity diesel engines (25°C): 5000cc
2x USB 5V output
Charging time: 7 hours
Dimensions: 290 x 80 x 230 mmL
Cable length: 540mmL

Fully automatic professional microprocessor controlled 6/12/24V charger suitable for all Pb: WET, MF, GEL, AGM, Ca/Ca batteries.
3 Charging modes (1.5 - 3.5 and 7.0 Amp) Suitable for batteries from 8 to 130 Amp. With desulfation function.

The charger is set to the battery voltage at the push of a button. 6, 12 or 24 volts. The maximum charging current is then set (min/med/max). A desulfation program may be run before charging. With this, the charger tries to get (slightly) sulphated batteries back to normal.

Can remain connected to the battery for a long time. Keeps the battery "ready for use".
Good protection, designed to protect vehicle electronics. Spark-free. Protected against reverse polarity and short circuit. The charging voltage is free from interference and voltage peaks. Can be connected directly to the battery, it does not have to be disconnected (DIN 40839 fault class I.) Battery Test for sulphated battery detection and sulphated battery recovery "Desulphation", regenerates batteries that are heavily discharged.

Due to its universal applicability and reliability, this charger is ideal for use in workshops.

Technical data:
Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 260W
Nominal battery voltage: 6 - 12 - 24 Volt
Voltage limitation: 7.4 - 14.8 - 29.6 Volt
Average charging current: 1.5 - 3.5 - 7.0 Amp
Effective charging current: 11 Amp. max
Charging functions: 3
Charging programs: 2
Battery types: Pb: WET, MF, GEL, AGM, Ca/Ca
Battery capacity (Ah min/max): 8 / 130

Fully automatic professional microprocessor controlled 6/12/24V charger suitable for all Pb: WET, MF, GEL, AGM, Ca/Ca batteries.
3 Charging modes (3.0 - 6.5 - 13A) Suitable for batteries from 15 to 260 AH. With desulfation function.

The charger is set to the battery voltage at the push of a button. 6, 12 or 24 volts. The maximum charging current is then set (min/med/max). A desulfation program may be run before charging. With this, the charger tries to get (slightly) sulphated batteries back to normal.

Can remain connected to the battery for a long time. Keeps the battery "ready for use".
Good protection, designed to protect vehicle electronics. Spark-free. Protected against reverse polarity and short circuit. The charging voltage is free from interference and voltage peaks. Can be connected directly to the battery, it does not have to be disconnected (DIN 40839 fault class I.) Battery Test for sulphated battery detection and sulphated battery recovery "Desulphation", regenerates batteries that are heavily discharged.

Due to its universal applicability and reliability, this charger is ideal for use in workshops.

Technical data:
Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 530W
Nominal battery voltage: 6 - 12 - 24 Volt
Voltage limitation: 7.4 - 14.8 - 29.6 Volt
Average charging current: 3.0 - 6.5 - 13A
Effective charging current: 22 Amp. max
Charging functions: 3
Charging programs: 2
Battery types: Pb: WET, MF, GEL, AGM, Ca/Ca
Battery capacity (Ah min/max): 15 / 260

Fully automatic professional microprocessor controlled 6/12/24V charger suitable for all Pb: WET, MF, GEL, AGM, Ca/Ca batteries.
3 Charging modes (7 - 15 - 25 Amp) Suitable for batteries from 30 to 450 Amp. With desulfation function.

The charger is set to the battery voltage at the push of a button. 6, 12 or 24 volts. The maximum charging current is then set (min/med/max). A desulfation program may be run before charging. With this, the charger tries to get (slightly) sulphated batteries back to normal.

Can remain connected to the battery for a long time. Keeps the battery "ready for use".
Good protection, designed to protect vehicle electronics. Spark-free. Protected against reverse polarity and short circuit. The charging voltage is free from interference and voltage peaks. Can be connected directly to the battery, it does not have to be disconnected (DIN 40839 fault class I.) Battery Test for sulphated battery detection and sulphated battery recovery "Desulphation", regenerates batteries that are heavily discharged.

Due to its universal applicability and reliability, this charger is ideal for use in workshops.

Technical data:
Power supply (Volt AC 50-60Hz): 1 Ph x 230
Power: 760W
Nominal battery voltage: 6 - 12 - 24 Volt
Voltage limitation: 7.3 - 14.5 - 29.0 Volt
Average charging current: 7.0 - 15.0 - 25.0 Amp
Effective charging current: 37 Amp. max
Charging functions: 3
Charging programs: 2
Battery types: Pb: WET, MF, GEL, AGM, Ca/Ca
Battery capacity (Ah min/max): 30 / 450

The Go 2000 is a powerful portable battery booster for 12V vehicles, ideal for motorcycles, cars, and vans. Thanks to the durable AGM Premium battery, it starts vehicles quickly and reliably, even with deeply discharged batteries.

Key Features:
- Vehicle boost function: 12V: 800A (peak 2000A)
- Robust AGM battery: suitable for intensive use, charging time 11 hours
- LED lamp: steady light, flashing alarm, and SOS signal
- Extra functions: 5V USB output and 12V car lighter for mobile devices
- Portable and user-friendly: LCD display, 1.6 m copper cables with 500A fuse, switch 0–12V

Technical Data:
- Suitable for Pb Wet, GEL, AGM, and Start & Stop batteries
- Charging time: 11 hours

Portable traditional 12 Volt battery charger for charging Pb wet batteries (lead-acid batteries).

Reverse polarity protection.

Short-circuit protection at the clamps.

Input cable 2.0 m with two-pin plug.

Technical specifications:
- Power supply (Volt AC 50-60Hz): 1 Ph x 230
- Power: 50W
- Nominal battery voltage: 12 Volt
- Average charging current: 2.5 Amp
- Effective charging current: 4 Amp max
- Charging functions: 1
- Battery capacity (Ah min/max): 15 / 60