Manual wire feed welding (2-step)
Protects against overload
Equipped with Euro connection
4 Welding programs

Included: Welding torch, welding cable 3 m, ground cable 2.7 m, gas hose 1.5 m

Technical data:
Power supply (Volt 50-60HZ) 1 Ph x 230
Fuse (AMP): 20A
Welding range:
MIG / No Gas: 10 – 200A
MMA: 10 – 160A
TIG: 10 – 200A
Duty cycle:
MIG / No Gas: (180A – 25%) – (100A – 60%)
MMA: (150A – 25%) – (100A – 60%)
TIG: (180A – 25%) – (100A – 60%)
No-load voltage (Volt): 86V
Coil: 200 – 300mm
Dimensions (L × W × H): 55 × 28 × 43 cm

Wire MIG MAN/SYN:
Steel: Ø0.6 – 0.8 – 0.9 – 1.0mm
Stainless steel: Ø0.8 – 1.0mm
Aluminium MG wire: Ø0.8 – 1.0 – 1.2mm
Aluminium Si wire: Ø0.8 – 1.0 – 1.2mm
CuSi 3 wire: Ø0.8 – 1.0mm
CuSi 8 wire: Ø0.8 – 1.0mm
Shielded wire: Ø0.8 – 0.9 – 1.0 – 1.2mm

Electrodes:
Power supply (Volt 50-60HZ) 1 Ph x 230
Installation power: 5KW
Fuse (AMP): 20A
2-step wire feed
Euro coupling Cable: 25mm² Rutile: Ø1.6 – 4.0mm Basic welding electrodes: Ø2.0 – 4.0mm TIG torch electrode: Ø0.5 – 2.4mm