Search in assortment

This fully adjustable carrier is placed on the bodywork and serves to suspend the engine block during assembly work. The carrier has 4 support points and is fully adjustable and therefore always fits on the inner fenders. Support from below is no longer necessary and unwanted turning or tilting of the engine is prevented. Very handy when working on the engine block or gearbox.
Incl. 2 links and hoist chains (530mm)
Variably adjustable width up to max. 1510mm
Variably adjustable cross beams from 510 - 845mm
Load capacity 315 kg

Spare part 9G0613: Plastic screw.

Spare part 9G0613: Left adjustment bracket.

Spare part 9G0613: Right adjustment bracket.

For dismantling the diesel filter without damaging the expensive plastic filter housing. This two-piece set includes a clamp to mount the filter housing in a vice and an adapter that fits tightly on the filter housing cover. Applications: Fiat, Lancia, Opel and Suzuki.

Engines:
Fiat-/Lancia engines: 1.3 16V MJTD, 1.3 16V JDT, 1.9 8V JTD, 2.0 8V JDT, 2.2 16V JTD, 2.3 16V JDT, 2.8 JTD, 3.0 16V JDT
Opel engines: DA13, Z13DT, Z13DTH, Z13DTJ, Z19DT, Z19DTL, Z19DTH (not suitable for Corsa-D and Meriva from 2007)
Suzuki engines: D13A, Z13DT/DTH

Automatic air reel for compressed air, with hose guide 15 meters.

Technical data:
- Wall mounting
- Inlet / Outlet 1/4''
- Maximum pressure: 300 PSI ( 20 Bar )
- Hose length 15M
- Internal diameter of the hose: 5/16''

Automatic air reel for compressed air, with hose guide 12 meters.

Technical data:
- Wall mounting
- Inlet / Outlet 1/4''
- Maximum pressure: 300 PSI ( 20 Bar )
- Hose length 12 m
- Internal diameter of the hose: 3/8''

#N/A

These models are designed for use on trucks, height adjustment is done using the knurled nut and threaded bolt.

12 Ton
Min. height: 710mm
Max. height: 1065mm

Specifically designed for power brake bleeding on Tesla vehicles. The metallic adapter easily holds pressure up to 2.5 BAR (36 PSI), ensuring safe and efficient operation. Suitable for Tesla Model S, X, 3, and Y. Ideal for professional use.

This impact wrench is a handy tool for loosening screws and bolts that are very tight. It should be hit with a hammer. The downward movement that is created is converted into a strong lateral force in the impact wrench. This force moves the screw. The screw is, as it were, jolted loose. Due to the downward force, there is less chance of the screw or bolt "running loose".

Force Tape measure with auto-stop system of 300cm