Search in assortment

This automatic digital multimeter is designed for both professionals and DIYers who want to perform reliable and accurate measurements. The device is equipped with all the basic measurement functions required for various electrical measurements and is built to withstand long-term and intensive use.

Rugged multimeter with basic measurement functions
Automatic determination of AC voltage, DC voltage and resistance
Non-contact induction voltage measurement
Large 3.5" LCD display
Test lead set with test probes (Red/Black)
Including 700 mAh lithium-ion battery

This multimeter is specially designed for working on electric or hybrid vehicles. Suitable for measuring resistance and voltage, insulation, and testing continuity.

Large display
Measuring range AC voltage: 0.4 - 1000V
Measuring range DC voltage: 0.4 - 1000V
Cat III 1000V
Cat IV 600V
Incl. test probes

Loose measuring probes for LR-MT 07 multimeter from Leitenberger

Multimeter with rubber coating, with cable, digital 5-segment LCD display.
With the ability to meet the vast majority of documents.
Levering complete met meetsnoeren.

Technical requirements: Meetbereik AC spanning 200 mV - 750 V Meetbereik DC spanning 200 mV - 1 k V Meetbereik AC stroomsterkte 200 µA - 10 A Meetbereik DC stroomsterkte 200 µA - 10 A Meetbereik weerstand 200 - 20M Ohm Zekering 2A, 600V R MS Zekering 12A, 600V RMS

Cable set t.b.h. WT-2037

100cm long

Cable set t.b.h. WT-2037

300cm long

Cable connectors TBV. WT-2037 & WT-2038

Total Length: 110CM
Cable Length: 100 CM

Measuring probe for a multimeter.

Set of 2 pieces: red and black

Prick measuring pin pierces through the insulation of the wiring, after which the needle makes contact with the wire

Digital multimeter with ampere clamp for measuring alternating current, alternating voltage, alternating current and resistance.
This multimeter is equipped with an easy-to-read display and is supplied with a test cable.
The perfect choice for service or installation work in automotive and industrial applications.

Specifications:

AC/DC mini (V) 0.4V
AC/DC voltage max (V) 600 V
Intensity AC / DC max (A) 400 A
Intensity AC mini (A) 40A
Max AC Current (A) 400 A
DC maximum current (A) 400 A
Min resistance (ohm) 400 Ohm
Maximum resistance (ohm) 40000 Ohm
Battery: 2 1.5V AAA
Low battery indication
Storage conditions: from -10°C to +50°C, max. 85% RH
Safety category: CAT II 600V

Digital multimeter AC/DC with temperature measurement.

3.3/4" LCD display with blue backlight (display up to 3999)
Overload indication
Negative polarity indicator
Sampling rate 2 - 3 times per second
Operating temperature 0°C-40°C <75% humidity
AC voltage: 4-40-400-600V
DC voltage: 0.4-4-40-400-600V
Resistance: 400-4k - 40k-400k 4m 40MOhm
Frequency: 10-100 Hz 1 kHz-10 k - 100 k-200 kHz
Capacitance: 40nF-400nF-4µf-40µF-100µF
Temperature: -20°C ~ 400°C
Diode test by means of measurement with beep sound
Humidity: 5% ~ 95%
Dimensions 165 x 83 x 47mm
Supplied with 9V battery
Instructions for use in English

Extensive set of test leads and parts suitable for testing, tracing and research of automotive electronic circuits.
Set includes standard Ø 4mm plugs, suitable for use with most diagnostic multimeters and test equipment.
Supplied in a clear case for quick location of the necessary parts.