Brake caliper cap suitable for fixed brake calipers on Porsche Macan, Cayenne and Cayman, VW Touareg and Audi Q7.
1/2" drive x 9 mm x 38 mmL (10 side)

Suitable for fully or partially clamping brake lines and hoses of the cooling system. Easy to operate with one hand by means of sliding clamp.

Suitable for ear or compressible hose clamps. Due to the special positioning of the jaw, the clamps can be closed on either the left or the right side.

Special socket wrench for dismantling the diesel filter as in HDi engines of Citroën, Fiat, Ford, Peugeot and Volvo. Due to the perfect fit, the plastic filter cover can be tightened firmly again (without damage) and any air leakage is prevented. Suitable for 2.0 and 2.2 HDi diesel engines. Cross-milled 6-sided version with 1/2" drive.

Applications:
Citroën: C4 2.0 HDi 16V, C4 Picasso 2.0 / 2.2 HDi, C5 / C8 2.0 / 2.2 HDi 16V, Jumpy 2.0 / 2.2 HDi
Fiat: Scudo / Ulysse Mk II 2.0 JTD 16V
Ford: Focus / Focus C-Max / Galaxy / Kuga / S-Max 2.0 TDCi
Peugeot: 307 / 308 / 407 / 607 / 807 / Expert 2.0 HDi 16V
Volvo: C30 / C70 / S40 Mk II / V50 2.0 Diesel (136 Pk)

Hose clamp pliers for the most common hose clamps.
Locking mechanism to keep the pliers open.
- Capacity: 0 mm – 65 mm

For removing and installing the quick couplings on in-line petrol filters on Fiat, Opel and Volkswagen. This allows you to disconnect the petrol line from the filter, the pliers push the claws of the quick coupling outwards. Using these pliers prevents damage to the quick couplings.
- Length: 160 mm

For removing and installing quick connectors on in-line fuel filters in Audi, Fiat, Mercedes, Opel, Seat, and Volkswagen vehicles.

This pliers tool helps prevent damage to the quick connectors.

This 1/2" angle gauge is suitable for tightening bolts by means of angular rotation. Equipped with a flexible arm with a strong magnet and has a range of 0° - 360°.
- Maximum tightening torque approx. 280 Nm
- Range: 0 - 360°
- Drive: 1/2"

For mounting "blind" circlips without eyelet, such as in the drive shaft, differential, constant velocity joint, clutch, engine and brakes of e.g. Audi, Volkswagen and American vehicles. With these pliers the blind circlips are not damaged and can be reused.
- Equipped with a curved, flat and serrated jaw for extra grip
- Opening max. 38 mm
- Length: 230 mm

Wheel weight pliers with plastic impact head.

Castle nut socket wrench for loosening and tightening castle nuts such as bearing nuts.
- KM 4
- Outside diameter castle nut: Ø 32 mm
- Outside diameter socket wrench: Ø 35 mm
- 4 Cams (4mm)
- Connection: 1/2"

Castle nut socket wrench for loosening and tightening castle nuts such as bearing nuts.
- KM 5
- Outside diameter castle nut: Ø 38 mm
- Outside diameter socket wrench: Ø 41 mm
- 4 Cams (5mm)
- Connection: 1/2"